Front Control Arm Bush Kit

A

Standard Alignment

KIT5360CAK

Kit includes: 1xSPF4175K, 1xSPF4176K

Quantity required: 1
Stock: No longer stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

Caster Increase

KIT5360CADJK

Kit includes: 1xSPF4175K, 1xSPF4178K

Quantity required: 1
Stock: No longer stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

2

24mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link Kit

RC0033FZ-24KIT

Factory fit. Includes bushings and 3 stage anti-corrosion coating and Link Kit

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes, 2 x Links

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

3

Complete Lower Control Arm Kit

A

Lightweight Alloy Adjustable with DuroBall

ALOY0018K

These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees. These enhancements are the optimal settings over standard to produce a better handling vehicle. SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs. The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken. The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Arms

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

4

Control Arm Lower Front Bush Kit

SPF4175K

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Price: £64.37 (exc. VAT) (£77.24 inc. VAT)

Alternative Part(s) available. Click to view

5

Control Arm Lower Rear Bush Kit

A

Standard Alignment

SPF4176K

Standard Replacement

OEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

Steering-Pull Correction Kit

SPF4177K

Single Caster Offset 1 degree caster adjustment available Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

C

Performance Alignment Kit

SPF4178K

Double Caster Offset up to 2 degrees caster adjustment. Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics. Follow the installation instructions and enjoy the results!

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

6

Extra Camber Strut Mounts

TRC5000

Made from cast aluminium and featuring SuperPro's unique polyurethane to keep it securely but comfortably located, this part gives 1 degree of extra camber adjustment using the top-mount. It's been designed to work with OE suspension (including damptronic OE dampers) and aftermarket coilovers.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Mounts

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

7

24mm Heavy Duty 2 Position Blade Adjustable Sway Bar

RC0033FZ-24

Factory fit. Includes bushings and 3 stage anti-corrosion coating

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

8

Sway Bar Link Kit - Heavy Duty Adjustable

TRC4301

12mm Ball Joint Adjustable Link, Minimum Length 320 mm. Maximum Length 365 mm. OE length 355mm

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Links

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

9

Sway Bar Link

TRC4048

Standard Replacement12mm Ball Joint Link

90 Degree opposed

Length 334mm center to center

Quantity required: 2
Stock: In Stock

Price: £29.25 (exc. VAT) (£35.10 inc. VAT)