Track Widening TRAK+® Wheel Spacers
H&R Spezialfedern B60556651
Please note additional information and vehicle-specific technical notes!
DRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!
The original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.
When using our DRA-Systems the DRA-bolts on the rear axle might be too long depending on the brake system. They either have to be shortened by 3 mm or exchanged with Part. No. 1252201.
Not usable with steel-rims!
Specifications
Track widening per axle [mm]
60mm
Thickness [mm]
30mm
Number of Holes
5
Bolt Hole Circle Ø [mm]
112mm
Centering Diameter [mm]
66.5mm
Colour
black
Registration Type
with TÜV® certificate
Follow installation instructions
EAN / Barcode
04048419131126
Product Downloads / PDF Files
Vehicle Fitments
Videos