Track Widening TRAK+® Wheel Spacers
H&R Spezialfedern B40346334
Please note additional information and vehicle-specific technical notes!
DRM = The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
Please note that the wheel hubs on the rear axle have to be sealed watertight by mounting the spacers.
8.) If the depth of the spacer is smaller than the length of the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.
Specifications
Track widening per axle [mm]
40mm
Thickness [mm]
20mm
Number of Holes
4
Bolt Hole Circle Ø [mm]
108mm
Centering Diameter [mm]
63.3mm
Colour
black
Registration Type
with TÜV® certificate
Follow installation instructions
EAN / Barcode
04048419280732
Product Downloads / PDF Files
Vehicle Fitments
Videos