Track Widening TRAK+® Wheel Spacers
H&R Spezialfedern 60155000
Please note additional information and vehicle-specific technical notes!
DRM = The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
8.) If the depth of the spacer is smaller than the length of the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.
Some of the wheels on these vehicles are fastened with Flat-head-bolts. In this case perfect centering of the wheel can not be guaranteed.
Specifications
Track widening per axle [mm]
56mm
Thickness [mm]
28mm
Number of Holes
5
Bolt Hole Circle Ø [mm]
139.7mm
Centering Diameter [mm]
108mm
Colour
silver
Registration Type
with TÜV® certificate
Follow installation instructions
EAN / Barcode
04048419085535
Product Downloads / PDF Files
Vehicle Fitments
Videos