Suspension Kit, springs/shock absorbers Monotube coil overs
H&R Spezialfedern 28734-2
Please note additional information and vehicle-specific technical notes!
Note DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
The minimum clearance between tires and suspension/body parts is 5 mm. If the clearance is less than 5 mm, it has to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R.
Lowering beyond the dimensions given in the type approval may result in damage. These damages are not covered by H&R.
Kit contains:
- 1 x 3224452-L2/1 Shock Absorber
- 1 x 3224452-R2/1 Shock Absorber
- 2 x 3270500-2/1 Shock Absorber
- 2 x 28734VA1 Suspension Spring
- 2 x 28734HA2 Suspension Spring
