Track Widening TRAK+® Wheel Spacers
H&R Spezialfedern 2095844
Please note additional information and vehicle-specific technical notes!
DR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.
These wheel spacers are mounted to the car with the original fastening elements.Additional accessory is not needed. Make sure the length of the original stud bolts is adequate.
Specifications
Track widening per axle [mm]
20mm
Thickness [mm]
10mm
Number of Holes
5
Bolt Hole Circle Ø [mm]
130mm
Centering Diameter [mm]
84mm
Colour
silver
Registration Type
with TÜV® certificate
Follow installation instructions
EAN / Barcode
04048419294456
Product Downloads / PDF Files
Vehicle Fitments
Videos