Products matching OEM 5347

Air Filter

FRAM PH5693

Specifications:

Filter type: Filter Insert, Height [mm]: 165, Outer Diameter [mm]: 140, Diameter 3 [mm]: 100, Diameter 4 [mm]: 111, Thread Size 1: M39x1,5

£Please Ask for Pricing

Shock Absorber

Rear Axle

BILSTEIN 19-260419

BILSTEIN - B4 OE Replacement
BILSTEIN 19-260419

Specifications:

Fitting Position: Rear Axle, Shock Absorber Type: Gas Pressure, Shock Absorber Design: Absorber does not carry a spring, Shock Absorber Mounting Type: Top eye, Shock Absorber Mounting Type: Bottom eye, Shock Absorber System: Twin-Tube

In Stock
Estimated despatch 24-48 hours

£108.00 £97.20 (inc. VAT)

Screw Plug, oil sump

BLUE PRINT FEBI-ADBP010001

ADBP010001

Specifications:

Length [mm]: 16, Outer Diameter [mm]: 22, External Thread Size: M16 x 1,5, Thread Length [mm]: 12, Spanner Size: 8, Bolt Head-/Nut Design: Inner rectangle, Material: Steel, Surface: Zink-nickel coated, Screw length below head [mm]: 12, Weight [kg]: 0.03, Supplementary Article/Info 2: without seal ring

£4.94 £4.44 (inc. VAT)

Oil Filter

BLUE PRINT FEBI-ADJ132101

ADJ132101

Specifications:

Filter type: Spin-on Filter, Height [mm]: 121, Outer Diameter [mm]: 76, Internal Thread Size: 3/4" - 16 UNF, Gasket inside diameter [mm]: 72.6, Weight [kg]: 0.397, Observe service information:

In Stock
Estimated despatch 0-48 hours

£10.51 £9.46 (inc. VAT)

Brake Pad Set, disc brake

Front Axle

BLUE PRINT FEBI-ADP154235

ADP154235

Specifications:

Length [mm]: 131, Width [mm]: 67, Test Mark: ECE R90 Approved, Fitting Position: Front Axle, Thickness 1 [mm]: 20, Wear Warning Contact: incl. wear warning contact, Weight [kg]: 1.75, Observe service information:

In Stock
Estimated despatch 0-48 hours

£49.20 £44.28 (inc. VAT)

Link/Coupling Rod, stabiliser bar

Front Axle

FEBEST 2023-COMF

2023-COMF

Specifications:

Fitting Position: Front Axle, Weight [kg]: 3.9, Rod/Strut: Coupling Rod, Packaging length [cm]: 32.5, Packaging width [cm]: 7.3, Packaging height [cm]: 4

In Stock
Estimated despatch Within 10 days

£Please Ask for Pricing

Link/Coupling Rod, stabiliser bar

Rear Axle

FEBEST 2023-MPR

2023-MPR

Specifications:

Fitting Position: Rear Axle, Weight [kg]: 0.5, Rod/Strut: Suspension Rod, Packaging length [cm]: 28, Packaging width [cm]: 6.6, Packaging height [cm]: 3

£Please Ask for Pricing

Mounting, steering gear

FEBEST CRAB-BU-KIT

CRAB-BU-KIT

Specifications:

Weight [kg]: 0.202, Packaging length [cm]: 6, Packaging width [cm]: 5.6, Packaging height [cm]: 3

In Stock
Estimated despatch Within 10 days

£Please Ask for Pricing

Shaft Seal, wheel hub

Rear Axle Left, Rear Axle Right

FEBI BILSTEIN FEBI-04617

04617

Specifications:

Width [mm]: 8.5, Width [mm]: 10, Inner Diameter [mm]: 55, Outer Diameter [mm]: 68, Material: FPM (fluoride rubber), Fitting Position: Rear Axle Left, Fitting Position: Rear Axle Right, Weight [kg]: 0.095

£Please Ask for Pricing

Tie Rod

Front Axle

FEBI BILSTEIN FEBI-102806

ProKit
102806

Specifications:

Length [mm]: 1,595, adjustable: Adjustable on both sides, Internal Thread Size: M30 x 1,5 RHT, Internal Thread Size: M30 x 1,5 LHT, External Thread Size: M24 x 1,5, Cone Size [mm]: 30, Fitting Position: Front Axle, Pipe Diameter [mm]: 40, Weight [kg]: 10.5, Supplementary Article/Info 2: with crown nut

£159.10 £143.18 (inc. VAT)

Previous Page